- Established 1967
- Residential & Commercial
- Connecticut-Based
- Family-Run Business
- Free Estimates
Driveway resurfacing places a new layer of hot-mix asphalt over an existing driveway after the surface is cleaned, repaired, and tack-coated. It is the right fix when the surface is worn or cracked but the base underneath is still solid; when the base has failed, the driveway needs to be rebuilt instead.
- Licensed & insuredCT HIC.0517988
- Honest assessmentsRepair when it works, replace when it does not.
- Family-run since 1967One company accountable from your estimate to the final walkthrough.
What this service includes
Every driveway resurfacing project from Maisano Brothers Inc. covers the work that makes the result last.
Base and surface assessment
We check whether cracking is limited to the surface or comes from a failing base, and whether water is draining away from the driveway.
Repairs before the overlay
Soft or broken areas are cut out and patched, and cracks are addressed, so problems underneath do not reflect straight through the new surface.
Edges, aprons, and transitions
Where a new layer would leave a lip at the garage, walkway, or street, we mill or cut back the existing asphalt so the finished surface meets them cleanly.
Tack coat and new wearing course
A tack coat bonds the new hot-mix asphalt to the old surface, then the new course is placed and rolled to a smooth, dense finish.
When this service makes sense
- The driveway surface is faded, raveling, or covered in surface cracks, but it is not sinking or heaving.
- Past patches have made the surface uneven and you want one consistent finish.
- Drainage is working: water runs off the driveway instead of pooling on it.
- The driveway is structurally sound but you want it to look new without a full rebuild.
Not sure what you need?
Our free on-site estimate includes an honest assessment and a clear recommendation — no pressure, no obligation.
How we deliver this service
A clear, proven sequence from first call to finished project.
- 1
Free on-site assessment
We look at the cracking, drainage, and base, tell you whether resurfacing will hold up, and provide a written estimate.
- 2
Preparation and repairs
We clean the surface, repair failed areas, and set up the edges and transitions for the new layer.
- 3
Tack coat and paving
We apply a tack coat and pave the new asphalt surface over the prepared driveway.
- 4
Compaction and walkthrough
The new surface is rolled to compaction, and we walk through curing time and first-season care with you.
Materials, equipment, and quality
The standards and details that separate work built to last from work built to look finished.
An honest call on the base
Resurfacing over a failing base only buys a season or two. If the base is gone, we will tell you and price a rebuild instead.
Repairs first, overlay second
Cracks and soft spots are dealt with before the new layer goes down, not hidden under it.
Clean tie-ins
Garage, walkway, and street transitions are cut back where needed so the new surface does not leave a trip edge or block drainage.
Frequently asked questions
What is the difference between resurfacing and replacing a driveway?
Resurfacing adds a new asphalt layer over the existing driveway after repairs. Replacement removes the old asphalt and rebuilds the base before paving. If the base has failed, only a new driveway will last.
How do I know if my driveway can be resurfaced?
Surface cracking, fading, and raveling usually can be resurfaced. Alligator cracking across large areas, sinking, heaving, or standing water point to base problems. Our repair or replace guide walks through the signs.
Will the new surface raise the height of my driveway?
Yes, a new layer adds height, which matters at the garage, walkways, and street. We plan those transitions before paving and cut back the existing asphalt where the new surface needs to meet them flush.
Do you resurface driveways that only need a few repairs?
If the damage is limited to a few areas, driveway repair may be all you need. We will tell you which option fits after looking at the driveway.
Related Services
Asphalt Driveway Repair
Asphalt driveway repair addresses potholes, cracks, and worn areas before they spread. Maisano Brothers Inc. repairs Connecticut driveways with crack filling, patching, and resurfacing, and gives an honest recommendation when full replacement is the better value.
Learn moreNew Asphalt Driveway Installation
A new asphalt driveway from Maisano Brothers Inc. is installed over a properly graded and compacted stone base, then paved with hot-mix asphalt and rolled to a smooth, durable finish. A correctly built residential driveway lasts 20 to 30 years when maintained.
Learn moreDriveway Sealcoating
Sealcoating is a protective coating applied to asphalt that shields it from water, sun, and oxidation. Maisano Brothers Inc. recommends sealcoating a Connecticut driveway every two to three years to slow cracking, restore color, and extend pavement life.
Learn moreRelated Reading
Signs Your Driveway Needs Repair vs. Replacement
Every aging asphalt driveway reaches a point where patching is no longer enough. Knowing how to read the signs helps you spend money where it actually pays off.
Read guideHow Long Does an Asphalt Driveway Last in Connecticut?
A well-built asphalt driveway in Connecticut should last 20 to 30 years. The wide range is not coincidence — it reflects how much five specific factors move the number: base preparation, drainage, sealcoating cadence, traffic, and climate exposure. This guide explains each one so you can estimate the realistic lifespan of your existing driveway or set yourself up for the full lifespan on a new one.
Read guideTowns we serve
Local pages for the towns where we have documented work, with projects from each.
Ready to move forward with driveway resurfacing?
Tell us about your driveway, parking lot, or court and we will provide a clear, no-pressure written estimate.